Pulp&Paper, Pulp&Paper Products, Pulp&Paper Manufacturers, Pulp&Paper Suppliers and Exporters - Tomine Mining And New Material Tech Co., Ltd.

Pulp&Paper

You are here: Home » PRODUCTS » Slurry Pump » Pulp&Paper

HD Series Chemical Multi-Stage Pump

WRIKU's HD series Chemical Multistage Slurry pump is a centrifugal pump of horizontal, single suction, multi-stage, sectional and radial split structure.This series was designed by the updated hydraulic design software CAD and CFD, with distinct effects in energy saving. And a symmetrical arrangement is adopted which could almost eliminate axial force.This could prolong the service time of bearing and mechanical seal. First stage impeller has improved pump’s anticavitation ability; and the inlet and outlet arrangement is flexible so as to satisfy various customers(unnecessary to replace the inlet and outlet sections).

More >>
FGD Series Pump for Flue Gas Desulfurization

WRIKU's FGD Pump features with unique design allowing long-term running of the mechanical seal without cooling water;its structure conveniences pipeline arrangement; it can couple intelligent monitoring system, and either automatic control or incorporating with DCS is possible. It is suitable to convey slurry or produced from flue gas desulphurization process, or corrosive liquid containing hard

More >>
J Series Heavy Duty Slurry Pump

WRIKU's J heavy-duty slurry pump is a successful pump designed by our company with advanced two-phase flow hydraulic design and hydraulic model, designed on basis of the requirements of users.The reasonable cantilever ratio and fine wearing materials make the pump feature high efficiency, energy-saving, long service life, high conveying density, good cavitation, resistance smooth running, leakage-free and easy maintenance.

More >>
AZ Series Pulp Pump

WRIKU's AZ series Pulp Pump is a successful design based on long-term technology accumulation and on the experience of domestic and overseas advanced technology. The pump has a strong capacity to convey fiber, particles, the pulp below 8% density and other liquid with the solid content below 30%. It can be used in SUCH operating environments LIKE paper making, metallurgy, fertilizers, salt collecting, drainage and power plant,

More >>
MA Series Coal Chemical Pump

WRIKU's MA series Coal Chemical Pump is a kind of high temperature and pressure, anti-corrosive and anti- abrasive, which is designed for coal chemical according to API610 standard.This series adoptes the world leading technology characteristics . Its Casing is designed independently according to requirements of anti-corrosive, anti-abrasive and pressure of ASTM, and designed with advanced hydraulic mode.

More >>
WYM Submerged Slurry Pump

WRIKU's WYM Submerged Slurry Pump is widely used in Chemicals, oil, pulp and food industry .

More >>
SK Liquid-Ring Vacuum Pump

WRIKU's SK Series liquid-ring vacuum pump is an energy-saving product developed by our company, and is used to pump gas which carries no solids undissolved or just slightly dissolved in working liquid, to form vacuum and pressure in the closed container.The characteristics of this series product are as followings:

More >>
BS Series Suction Pump

BS series pump is a double-suction, single-stage process pump by referring to API 610th edition.It is a centrifugal pumps with radial split, double-support, high temperature, heavy-loading design, The mounting is centerline, the casing is double vortex structure, the impeller is double suction design, the pump has the low NPSH and good axial balance. The inlet and outlet are on the top, it is easy to check and maintenance, The seal and flush system are strictly designed conform to API682. The mechanical seal and seal flush plan recommended by API682 specification can put into this series pump.

More >>
FK Series Plastic Pump

WRIKU’s FK Series Plastic Pump is designed by our own company, and is of single-stage, single suction, and cantilever type. Its rated performance conforms to JB/T8688.It features reasonable design, compact structure, reliable performance,smooth running, easy operation and maintenance. The materials of the wetted parts for the FK plastic pump are Fluorine mix crystal,PFA or UHMWPE; According to the using characteristics of centrifugal pump, the wetted parts, pump casing, impeller are manufactured with unique process of fluorine-lined steel in order to eliminate the defects of insufficient strength of full plastic casing. When strong acid medium with temperature lower than 180℃ is conveyed, this material can substitute 316L, Monel, Hastelloy alloy, and high alloy stainless steel.This pump can be widely used in the industries of petrochemical, metallurgy, pesticide, paper-making, environmental protection, Electro-planting, paint, chemical and electic power, etc.

More >>
MT Series Light Duty Slurry Pump

WRIKU‘s MT light-duty slurry pump is designed for bentonite industry, abrasive and grinding tools manufacture, desulfation of power plant and conveyance of alumina ore slurry in aluminum plant, and is the ideal device matched with filter press and the optimal choice for conveying medium containing hard sundries. MT is simple in maintenance, highly resistant against abrasion and corrosion, economical in operation and reliable in sealing. It is suitable for conveyance of bentonite, carbide slag,lime milk, coal ash, gypsum slurry and sand- bearing crude oil.

More >>
HW Axial-flow Pump

WRIKU's HW Chemical Axial-flow Pump is a centrifugal pump of horizontal, single stage and end suction design, whose technical requirements conform to GB/T13008 standard.
It is mainly used in the chemical process with big flow and low head, especially is suitable in the compulsive circulating processes such as evaporation, thickening, crystallization, material circulation in the industries of alkali making, salt making, fermentation metallurgy, phosphate fertilizer,etc.

More >>
MT Wear-resisting Passage Pump

WRIKU’s MT series wear-resisting passage pump is a new series pump developed based on wear and corrosion resisting pumps, and conforms to ISO5199, API610 10th standards.Adopting vortex impeller,this pump has the following characteristics: reasonable structure, reliable and stable operation, high performance,good anti-cavitation,high load capacity and long service life etc.

More >>

POLYMER COATING ON PIPE&PUMP

Polymer Coating on Steel Pipe&Slurry Pump Spares with Wearing resistance, Energy saving and High Efficiency products to avoid high energy consumption& pollution and high rate of Claim

Pump type: Voith Pump-turbine;Purpose: Storage pump ;Medium: Sand-Bearing lake water ;Solution: anti-wear coating for impeller in advance;Coating: SiC Fine Bead

Pump Model:TT Gould Pump300 Application: silicon process pumpFluid: silicon powder slurrySlotion: pump casing wear coating after repair ;coating: SiC fine Bead type

Pump Model:TT Goulds Pump Casing300;Application: organic silicon process ;Fluid: silicon powder slurry; Coating: SiC fine Bead

Pump : Sulzer ZAP801;Application:FDG process ;Fluid: Lime slurry;Solution: Repairing on Pump cutwater throat ; Coating: SiC Fine Bead

Pump:KSB800-934;Application: Power Plant FGD Process;Fluid: Lime Slurry;Solution:Impeller Reparing;Coating:SiC Fine Bead

Pump Model: Andritz S3-150-330;Application: Pulp pump;Fluid: waste paper pulp;Solution: Pump casing Repairment ;Coating: SiC Fine Bead

Pump Model: ITT Goulds Pump Casing 300 ;Purpose: Silicone Process pump;Fluid: silicon slurry; Solution: Repairing worn case Coating: SiC Fine Bead

Name: pipeline liner Application: wear-resisting protection ;Fluid: lime slurry;Solution: Centrifugal casting siliconcarbide Coating: SiC Castable

Pump type: Voith Pump-turbine;Purpose: hydropower station ; Medium: Sand-Bearing lake water;Solution: anti-wear coating for impellerCoating: SiC Fine Bead

POLYMER COATING ON PIPE&PUMP

Quick Links

Products

Contact