MP-Φ250 disc  crusher  is used for exploration on  geology, metallurgy, energy, chemical industry, building materials and any other instituation  of laboratory crushing not higher than the medium hardness  such like brittle ores, rocks and other brittle materials, for the production of laboratory samples in crushing or mineral processing test samples for fine grinding stage.

XCGS-50 type magnetic separation tube is Davis analysis tube, which is suitable for mining, metallurgy, geology and other laboratories. It is used to determine the content of strong magnetic components and is a device to check these ores in the sorting process.

TC-300 diaphragm jig is used for gravity beneficiation. Gravity beneficiation is based on different specific gravity of ore and different sedimentation speed in the medium. The difference in mineral weight is used to complete the stratification and selection of mineral mixture.

XMQS series vacuum belt sieve ball mill adopts the integrated design of ball milling and sieving. Grinding and sieving are carried out at the same time in the cylinder. All materials that reach the ideal particle size are screened out in time, and the coarse materials that have not been screened are returned to the cylinder to be ground again. . 

The XFD series single-slot flotation machine for laboratory is used for flotation of a small amount of ore samples in industrial laboratories such as geology, metallurgy, building materials and chemical industry.

Thet T-LX series full batch flotation machine for laboratory is used for flotation of a small amount of ore samples in industrial laboratories such as geology, metallurgy, building materials and chemical industry.

The XFLB miniature closed-circuit continuous flotation machine for laboratory use is a continuous flotation machine with a small number of representative ore samples, the test results can represent the results of laboratory stand-alone small closed-circuit experiments and semi-industrial tests, and can provide the beneficiation index for laboratory use or semi-industrial use in a relatively short period of time.

It is used for Determination of coke dust content and sieving composition of metallurgical coke In line with the technical requirements of the national standard GB/T 2006-2008 "Method for Determination of Coke Dust Content and Screening Composition of Metallurgical Coke".  

The machine adopts optimized design to make its structure more compact and operation easier, fully sealed design, environmental protection and no dust, it can detect >40mm, 40-25mm, 25-16mm, 16-10mm lt;10mm five levels, in line with the technical requirements in GB8209, widely used in pellet plant, sinter plant and steel plant.

TN (S) -1100 × 500 shaker is a commonly used equipment for laboratories to conduct ore selectability research, experiments and gravity beneficiation in small-scale beneficiation plants.   

CRS-Φ400x240 multi-purpose drum weak magnetic separator is mainly used for mining engineering laboratories, intermediate test sites, concentrating plants and small concentrators to conduct small unit experiments, continuous experiments or production of magnetic ores such as magnetite and roasted magnetite when used. 

XJT type gas-filled multifunctional leaching mixer can be used for wet leaching and mixing in laboratories of mines and scientific research institutions such as geology, metallurgy, building materials, chemical industry, etc. The machine adopts external inflation to simulate the actual working conditions on site.

XFD single tank flotation machine is mainly used for stirring, scrubbing, separating and selecting a small amount of mineral samples in industrial laboratories such as geology, metallurgy, building materials, and chemical industry.

XFD Ⅲ single tank flotation machine is made of stainless steel with double frequency conversion control, mainly used for mixing, scrubbing, separating and selecting small amount of ore samples in laboratories of geology, metallurgy, construction materials and chemical industry

The XFG type hanging tank flotation machine for laboratory is a sorting equipment used for stirring, scrubbing, separating and selecting a small amount of mineral samples in the laboratories of mineral processing enterprises and scientific research institutions such as geology, metallurgy, building materials, and chemical industry. XFG is an updated product made by our factory as needed. It adopts all stainless steel frame, frequency conversion technology and digital display, which makes the whole machine beautiful in appearance, accurate in adjustment and convenient in use

XSBP-A type Φ200 slap-type standard vibrating screen machine is improved on the basis of PST-200 slap-type standard vibrating screen machine. After the improvement, it can not only have the technical performance of the prototype, but also the jacket screen is convenient and flexible, and the clamping is firm. ,

It is suitable for sieving dispersed materials in laboratories or production units of geology, metallurgy, coal, building materials, abrasives, chemical industry, medicine, food, environmental protection and other departments. This machine is mainly composed of organic body, screen mesh and transmission mechanism.

TPX60 Lab cyclone centrifuge concentrator is a test machine specially launched by WRIKU@TOMINE. Its test effect is higher than that of similar products at home and abroad. The high precision, simple operation and good test effect are the biggest features of this model.